About Contact
Home
Products
Packaging Adhesives
Industrial Adhesives
Technical Resources
Testing Capabilities
Ask A Question
Request A Sample
Request A Quote
CALL US: 425.378.8570
Products by Regulation

FDA Regulation 21 CFR175.320

Sec. 175.320 Resinous and polymeric coatings for polyolefin films. Resinous and polymeric coatings may be safely used as the food-contact surface of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, in accordance with the following prescribed conditions: (a) The coating is applied as a continuous film over one or both sides of a base film produced from one or more of the basic olefin polymers complying with 177.1520. Read Dow's FDA legal disclaimer
Find A FDA Regulation 21 CFR175.320 Solution
Filter By:
Product Name Family Application Method Supplied Solids Viscosity Coating Weight Coreactant Mix Ratio Details Regulations Markets Applications Benefits
ADCOTE™ 1217D Heat Seal Coatings,Solvent-Based Adhesives,Primers Gravure, Reverse roll, Slot die, Wire Wound Rods 17% 19 sec, #2 Zahn cup 2.0-6.0 lbs/ream Coreactant F, Cat F, Coreactant 9L10, Cat CT 100:2 with Coreactant F FDA Regulation 21 CFR177.1395,FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR175.105,FDA Regulation 21 CFR177.1390 Food,Medical & Pharmaceutical,Industrial Sail and Fabric,Retort Pouches,Agricultural Chemicals,Medical and Pharmaceutical Packaging,General Industrial UV Resistance,Grease and Oil Resistance,Moisture Resistance,High Heat Resistance,Adhesion to Foil and Metallized Films,High Chemical Resistance,High Green Bonds,High Bond Strength
ADCOTE™ 313 Primers Gravure, Smooth roll transfer 20 % 17 sec., #3 Zahn 0.005-0.02 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.105 Food,Industrial Meat and Cheese Packaging,Snack Food Packaging,Frozen Food Packaging,Confectionary Packaging,General Industrial Moisture Resistance,Low Odor
ADCOTE™ 35K1E Heat Seal Coatings Gravure 40 % 2,000 cPs @ 77 °F 3.0-3.5 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105 Food Condiment Packaging,Portion Packs Grease and Oil Resistance,Moisture Resistance,Adhesion to Foil and Metallized Films,High Chemical Resistance
ADCOTE™ 37JD1198 Heat Seal Coatings Air knife, Gravure, Wire Wound Rods 45 % 100 cPs @ 77 °F 5.0-7.5 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105 Medical & Pharmaceutical Medical and Pharmaceutical Packaging Moisture Resistance,Good Porosity,Low Activation Temperature
ADCOTE™ 37P295BW Heat Seal Coatings Gravure, Wire Wound Rods 40 % 75 cPs @ 77 °F 2.0-4.0 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105 Food,Industrial Blister Packs,Meat and Cheese Packaging,Snack Food Packaging,Confectionary Packaging,In-mold Label,General Industrial Good Clarity,Low Activation Temperature,Low Odor,Peelable Bonds
ADCOTE™ 37P295HV-BW Heat Seal Coatings Gravure, Wire Wound Rods 40 % 1,000 cPs 1.5-2.0 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105 Food,Home & Personal Care,Medical & Pharmaceutical,Industrial Blister Packs,Cosmetic Packaging,Snack Food Packaging,Confectionary Packaging,Medical and Pharmaceutical Packaging,General Industrial Adhesion to high slip films,Low Activation Temperature,Low Odor,Peelable Bonds
ADCOTE™ 37R972 Heat Seal Coatings Gravure, Wire Wound Rods 45 % 150 cPs @ 77 °F 1.5 lbs/ream for coating, 3.0 lbs/ream for lidding structures - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105 Food,Home & Personal Care,Industrial Bottle Labels,Shrink Labels,General Industrial Good Clarity,Low Activation Temperature,Low Odor,Peelable Bonds
ADCOTE™ 3840D Heat Seal Coatings,Primers Air knife, Gravure, Reverse roll 40% - 2.0-6.0 lbs/ream Coreactant F 100:3.2 for Coreactant F FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105,FDA Regulation 21 CFR177.1390 Food,Medical & Pharmaceutical,Industrial Medical and Pharmaceutical Packaging,Condiment Packaging,Microwave Packaging,General Industrial UV Resistance,High Heat Resistance,Adhesion to Foil and Metallized Films,High Chemical Resistance
ADCOTE™ 50C12 Heat Seal Coatings Gravure, Reverse roll, Smooth roll transfer, Wire Wound Rods 22 % 100 cPs 0.5-0.7 lbs/ream for priming, 2.0-4.0 lbs/ream for coating - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105,FDA Regulation 21 CFR177.1310 Food,Home & Personal Care,Medical & Pharmaceutical,Industrial Agricultural Chemicals,Medical and Pharmaceutical Packaging,Condiment Packaging,General Industrial Grease and Oil Resistance,Moisture Resistance,Adhesion to Foil and Metallized Films,Low Odor,Peelable Bonds
ADCOTE™ 50C35 Heat Seal Coatings Gravure, Smooth roll transfer 34 % 3,500 cPs 1.0-1.5 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105,FDA Regulation 21 CFR177.1310 Food,Home & Personal Care,Medical & Pharmaceutical,Industrial Agricultural Chemicals,Medical and Pharmaceutical Packaging,Condiment Packaging,General Industrial Grease and Oil Resistance,Moisture Resistance,Adhesion to Foil and Metallized Films,Low Odor
ADCOTE™ 545 Solvent-Based Adhesives Gravure 66 % 3,500 cPs @ 25 °C 1.0-1.5 lbs/ream Coreactant F 90:10 FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105 Food,Industrial Stand-Up Pouches,Meat and Cheese Packaging,Cable Wrap,General Industrial Good Clarity,High Heat Resistance,Adhesion to Foil and Metallized Films,High Chemical Resistance,High Bond Strength
ADCOTE™ 545-80 Solvent-Based Adhesives Gravure 80 % 6,500 cPs @77 °F 1.1-2.5 lbs/ream Coreactant 9L10, Coreactant F, Coreactant CT 100:11.2 for Coreactant 9L10, 100:14 for Coreactant F, 100:11.2 for Coreactant CT FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105 Food,Home & Personal Care,Industrial Stand-Up Pouches,Cosmetic Packaging,Coffee Bags and Pouches,Large Format Bags,Meat and Cheese Packaging,Agricultural Chemicals,Cable Wrap,Condiment Packaging,Portion Packs,General Industrial Good Clarity,Moisture Resistance,Long Pot life,High Heat Resistance,High Running Solids,Adhesion to Foil and Metallized Films,High Chemical Resistance,Fast Bond Development,Fast Slitting Time,High Bond Strength
ADCOTE™ 7640 Heat Seal Coatings,Solvent-Based Adhesives,Primers Air knife, Gravure, Reverse roll 44-46 % 2,300-3,700 cPs 2.0-6.0 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105,FDA Regulation 21 CFR177.1390 Home & Personal Care,Industrial General Industrial Adhesion to Foil and Metallized Films,Peelable Bonds
ADCOTE™ HS 33-193 Heat Seal Coatings Gravure, Smooth roll transfer 25 % 70-150 cPs (Brookfield @ 25 °C) 3.5-5.0 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105,FDA Regulation 21 CFR177.1210 Food,Home & Personal Care,Industrial Coffee Bags and Pouches,Snack Food Packaging,Confectionary Packaging,Shrink Labels,Condiment Packaging,In-mold Label,General Industrial Adhesion to high slip films,Low Activation Temperature,Peelable Bonds
ROBOND™ PR 30035D Primers Gravure 16 % 18-22 secs, No. 2 Zahn cup @ 77 °F 1.0 lbs/ream - - FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105 Food,Industrial Hot Fill Pouches,Confectionary Packaging,Condiment Packaging,General Industrial Moisture Resistance,High Heat Resistance

Can't find the solution you're looking for?

Let Us Help

Technical Resources

The Importance of Quality Control Testing By being diligent in recording and monitoring tests for each laminated structure many potential laminate problems can be averted. Read More...

Powered by

ChemPoint has chemists and engineers with experience and market expertise to help you find the right solution. We are ready to work with you to understand your product needs and to help with your adhesive requirements.

dc-footer-image

Copyright. © The Dow Chemical Company (1995-2017). All Rights Reserved. © Trademark of The Dow Chemical Company("Dow") or an affiliated company of Dow.

Hi, let us know if you have any product questions as you visit our website.

ChemPoint reps are here to assist you