Products by Regulation

FDA Regulation 21 CFR177.1630

Sec. 177.1630 Polyethylene phthalate polymers.
Polyethylene phthalate polymers identified in this section may be safely used as, or components of plastics (films, articles, or fabric) intended for use in contact with food in accordance with the following prescribed conditions:

(a) Polyethylene phthalate films consist of a base sheet of ethylene terephthalate polymer, ethylene terephthalate-isophthalate copolymer, or ethylene-1,4-cyclohexylene dimethylene terephthalate copolyesters described in 177.1315(b)(3), to which have been added optional substances, either as constituents of the base sheet or as constituents of coatings applied to the base sheet.

(b) Polyethylene phthalate articles consist of a base polymer of ethylene terephthalate polymer, or ethylene-1,4-cyclohexylene dimethylene terephthalate copolyesters described in 177.1315(b)(3), to which have been added optional substances, either as constituents of the base polymer or as constituents of coatings applied to the base polymer. Read Dow's FDA legal disclaimer

Find A FDA Regulation 21 CFR177.1630 Solution

Filter By:

Product Name	Family	Application Method	Supplied Solids	Viscosity	Coating Weight	Coreactant	Mix Ratio	Regulations	Markets	Applications	Benefits
ADCOTE™ 1217D	Heat Seal Coatings,Solvent Based Adhesives,Primers	Gravure, Reverse roll, Slot die, Wire Wound Rods	17%	19 sec, #2 Zahn cup	2.0-6.0 lbs/ream	Coreactant F, Cat F, Coreactant 9L10, Cat CT	100:2 with Coreactant F	FDA Regulation 21 CFR177.1395,FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR175.105,FDA Regulation 21 CFR177.1390	Food,Medical & Pharmaceutical,Industrial	Sail and Fabric,Retort Pouches,Agricultural Chemicals,Medical and Pharmaceutical Packaging,General Industrial	UV Resistance,Grease and Oil Resistance,Moisture Resistance,High Heat Resistance,Adhesion to Foil and Metallized Films,High Chemical Resistance,High Green Bonds,High Bond Strength
ADCOTE™ 35D9	Heat Seal Coatings,Primers	Gravure	30 %	500 cPs @ 77 °F	0.5-4.0 lbs/ream	-	-	FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105,FDA Regulation 21 CFR177.1210,FDA Regulation 21 CFR178.1005	Food,Medical & Pharmaceutical,Industrial	Agricultural Chemicals,Medical and Pharmaceutical Packaging,Condiment Packaging,Portion Packs,General Industrial	Grease and Oil Resistance,Moisture Resistance,Adhesion to Foil and Metallized Films,High Chemical Resistance
ADCOTE™ 37JD1198	Heat Seal Coatings	Air knife, Gravure, Wire Wound Rods	45 %	100 cPs @ 77 °F	5.0-7.5 lbs/ream	-	-	FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105	Medical & Pharmaceutical	Medical and Pharmaceutical Packaging	Moisture Resistance,Good Porosity,Low Activation Temperature
ADCOTE™ 37P295BW	Heat Seal Coatings	Gravure, Wire Wound Rods	40 %	75 cPs @ 77 °F	2.0-4.0 lbs/ream	-	-	FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105	Food,Industrial	Blister Packs,Meat and Cheese Packaging,Snack Food Packaging,Confectionary Packaging,In-mold Label,General Industrial	Good Clarity,Low Activation Temperature,Low Odor,Peelable Bonds
ADCOTE™ 37P295HV-BW	Heat Seal Coatings	Gravure, Wire Wound Rods	40 %	1,000 cPs	1.5-2.0 lbs/ream	-	-	FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105	Food,Home & Personal Care,Medical & Pharmaceutical,Industrial	Blister Packs,Cosmetic Packaging,Snack Food Packaging,Confectionary Packaging,Medical and Pharmaceutical Packaging,General Industrial	Adhesion to high slip films,Low Activation Temperature,Low Odor,Peelable Bonds
ADCOTE™ 37R345-PS	Heat Seal Coatings	Air knife, Gravure	45 %	400 cPs @ 77 °F	2.0-5.0 lbs/ream	-	-	FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105	Medical & Pharmaceutical	Medical and Pharmaceutical Packaging	Moisture Resistance,Good Porosity,Low Activation Temperature,Low Odor,Peelable Bonds
ADCOTE™ 37R972	Heat Seal Coatings	Gravure, Wire Wound Rods	45 %	150 cPs @ 77 °F	1.5 lbs/ream for coating, 3.0 lbs/ream for lidding structures	-	-	FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105	Food,Home & Personal Care,Industrial	Bottle Labels,Shrink Labels,General Industrial	Good Clarity,Low Activation Temperature,Low Odor,Peelable Bonds
ADCOTE™ 37T77	Heat Seal Coatings	Flexo, Gravure, Wire Wound Rods	35 %	50-2,000 cPs	2.5-4.0 lbs/ream	-	-	FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105	Food	Snack Food Packaging,Confectionary Packaging,Condiment Packaging,Portion Packs	Moisture Resistance,Adhesion to Foil and Metallized Films,Peelable Bonds
ADCOTE™ 545	Solvent Based Adhesives	Gravure	66 %	3,500 cPs @ 25 °C	1.0-1.5 lbs/ream	Coreactant F	90:10	FDA Regulation 21 CFR175.320,FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300,FDA Regulation 21 CFR175.105	Food,Industrial	Stand-Up Pouches,Meat and Cheese Packaging,Cable Wrap,General Industrial	Good Clarity,High Heat Resistance,Adhesion to Foil and Metallized Films,High Chemical Resistance,High Bond Strength
ADCOTE™ HS 33-213	Heat Seal Coatings	Gravure	35 %	500 cPs @ 77 °F	3.5-4.5 lbs/ream	-	-	FDA Regulation 21 CFR176.180,FDA Regulation 21 CFR177.1630,FDA Regulation 21 CFR176.170,FDA Regulation 21 CFR175.300	Food	Condiment Packaging,Portion Packs,Microwave Packaging	Grease and Oil Resistance,Moisture Resistance,Adhesion to Foil and Metallized Films,High Chemical Resistance,Peelable Bonds
RHOPLEX™ 3208	Primers	Flexo, Gravure	44 %	200 cPs	0.5 lbs/ream	Melamine-formaldehyde curing resin (4:1 acrylic-to-curing resin) with p-TSA as catalyst (0.5-1.5 % on dry wt basis of 3208)	-	FDA Regulation 21 CFR177.1630	Industrial	General Industrial	Moisture Resistance

Technical Resources

The Importance of Quality Control Testing By being diligent in recording and monitoring tests for each laminated structure many potential laminate problems can be averted. Read More...

ChemPoint has chemists and engineers with experience and market expertise to help you find the right solution. We are ready to work with you to understand your product needs and to help with your adhesive requirements.

Talk to a product expert

FDA Regulation 21 CFR177.1630

Can't find the solution you're looking for?

Technical Resources